Quick Release Hub question

Contact Us

Social Media

Sponsors

New 944Spec legal DMEs for $325 with promo code thanks to our newest sponsor, Focus 9 Tech!

Official 944Spec Tees with a discount code for site wide Track Monkey discounts!

Affordable Shifter Solutions and Other Parts from Only944!

10% Off Transmission Service and Parts from Flying Horse Motorsport!

Welcome, Guest

Racing Discussion

Quick Release Hub question

(1 viewing) (1) Guest

Reply Topic

Page:
1

TOPIC: Quick Release Hub question

Quick Release Hub question 11 years, 10 months ago #15243

Manuel_M OFFLINE Junior Racer Posts: 65	Hey guys, The quick release hub I'd like to get only comes in a 3/4" weld on adapter. My question is can this be welded to the 5/8" steering shaft of the porsche or do I have to get a different hub? Thanks.
	Reply Quote

Re: Quick Release Hub question 11 years, 10 months ago #15248

Sterling Doc OFFLINE Endurance Racer Posts: 2102	Anything can be welded together, getting it true will be the tough part!
	Eric Kuhns National Director Emeritus 2007, & 2008 National Champion 2011, 2012 2nd Reply Quote

Re: Quick Release Hub question 11 years, 10 months ago #15250

joeblow OFFLINE Seasoned Racer Old Racer Posts: 226	Yep, the only way I ever did this was to machine the hub on a lathe so it was an interference fit over the steering shaft. I would then freeze it and press it onto the shaft. Last step was to TIG weld it. This is one item you dont want to screw up!
	Old Racer! Reply Quote

Re: Quick Release Hub question 11 years, 10 months ago #15252

Manuel_M OFFLINE Junior Racer Posts: 65	That's a good point, to be on the safe side I should just get a 5/8 hub and it should be easy to keep true.
	Reply Quote

Reply Topic

Page:
1

Racing Discussion

Powered by Kunena

Time to create page: 0.08 seconds