2015 Rules posted

Social Media

TOPIC: 2015 Rules posted

2015 Rules posted 10 years ago #18925

Sterling Doc OFFLINE Endurance Racer Posts: 2102	Look here: nasa-assets.s3.amazonaws.com/document/do...ec_v12-Dec-31-13.pdf Ken will be updating the link from our website soon. Merry Christmas!
	Eric Kuhns National Director Emeritus 2007, & 2008 National Champion 2011, 2012 2nd Last Edit: 10 years ago by Sterling Doc. Reply Quote

Re: 2015 Rules posted 9 years, 11 months ago #19070

KDJones2000
OFFLINE
Junior Racer
Posts: 55

Found a typo on the section references:

12.5 Heads
12.5.1 Cylinder heads may be shaved to limits listed in 11.5.2 and 11.5.3 to achieve the maximum
compression ratio of 10.5:1 for all eligible model years. This is intended to provide sufficient
allowance to true the head more than once.....

11.5.2 and 11.5.3 should be 12.5.2 and 12.5.3.

15.2.1 For the purposes of inspection and compliance the maximum track as measured in 14.2.2
shall be no greater than 68.25 inches front and 67.25 inches rear.

14.2.2 should be 15.2.2

#124, 1987 924S Spec racer
1988 Turbo S

Last Edit: 9 years, 11 months ago by KDJones2000.

Reply Quote

Re: 2015 Rules posted 9 years, 11 months ago #19071

Sterling Doc OFFLINE Endurance Racer Posts: 2102	Thanks - probably from when a new paragraph was added. I'll work on updating it
	Eric Kuhns National Director Emeritus 2007, & 2008 National Champion 2011, 2012 2nd Reply Quote

Reply Topic

New Topic

Page:
1

944-SPEC

Racing Discussion

Rules changes

Time to create page: 0.07 seconds

Social Media

Sponsors

TOPIC: 2015 Rules posted

2015 Rules posted 10 years ago #18925

Re: 2015 Rules posted 9 years, 11 months ago #19070

Re: 2015 Rules posted 9 years, 11 months ago #19071